Customer Reviews:
Showing reviews 1-5 of 17
 Cheap and effective - I love the long bit December 6, 2008
New England Yankee (Northern New England)
9 out of 9 found this review helpful
It's counterintuitive, but the long bit is actually the easiest to use and most stable when driving pocket screws. The Kreg bits are very well made, hardened, and don't wear as fast as ordinary square drive bits. That's particularly important when doing pocket hole construction - there's nothing more frustrating than a stripped bit or screw head halfway in a pocket hole. In fact, I keep my Kreg bits separate and only use them for pocket holes. I use my regular bit set square drive bits for other square drive uses and toss them as they wear.
No review needed! April 6, 2008
J. Brown
6 out of 6 found this review helpful
I have found that all Kreg products work. I bought the drivers for backups. Have not needed to replace originals in 3 years.
Driver Bits April 11, 2008
Gary T. Gaba
3 out of 3 found this review helpful
Great addition to the Pocket Hole Jig kit! However, I didn't realize these were already included in the Kreg K3MS kit. Always handy to have extras.
They're bits, what could I possibly say April 3, 2007
K. Leiter (Michigan)
2 out of 2 found this review helpful
Probably 2 of the handiest bits Ive ever owned mind you, but they really are just bits. Ive driven over 300 screws with the 6" and its as good as new.
high quality driver bits August 5, 2007
S. M. Comstock (Forney, Tx United States)
2 out of 2 found this review helpful
Both the 3" and the 6" bits have exceptional grip on square drive screws. I have used the cheap chinese bits and there is no comparison on performance. It's suprising that there is much of a difference, (after all square should be square right???) but there really is a difference.
Showing reviews 1-5 of 17
|
